Trang 1/6 123 ... CuốiCuối
Hiện kết quả từ 1 tới 10 của 56

Chủ đề: Tiêu chuẩn ASTM

  1. #1
    Administrator Avatar của nbc
    Tham gia ngày
    19/03/07
    Đến từ
    Đà Nẵng city
    Bài gửi
    8.402
    Cảm ơn
    3.378
    Được cảm ơn 17.536 lần trong 4.775 bài viết

    Mặc định Tiêu chuẩn ASTM

    ASTM là cụm từ viết tắt của American Society for Testing and Materials.

    Thành lập từ năm 1898, ASTM là một tổ chức xây dựng các tiêu chuẩn hàng đầu của Mỹ cũng như trên thế giới.

    Không chỉ có các tiêu chuẩn trong lĩnh vực xây dựng, ASTM còn có các tiêu chuẩn trong các lĩnh vực khác như: luyện kim, dầu mỏ, sơn, hóa chất, chất dẻo, cao su, dệt may...

    Ngày nay, bộ tiêu chuẩn của ASTM đã nổi tiếng trên khắp thế giới và đã không ít quốc gia sử dụng trực tiếp, gián tiếp bộ tiêu chuẩn này (trong đó có Việt Nam).

    Trong các dự án đầu tư xây dựng ở Việt Nam, các dự án giao thông sử dụng nó rất phổ biến, đặc biệt là các dự án có yếu tố nước ngoài.

    Được sự cung cấp của các thành viên tâm huyết của Diễn đàn, đặc biệt là bạn PhuongX3, CauduongBKDN xin giới thiệu toàn bộ danh mục thí nghiệm của bộ tiêu chuẩn này.

    Các thành viên có nhu cầu về tiêu chuẩn, hãy gửi bài đề nghị, các bạn sẽ được đáp ứng.
    Ngày hôm nay tốt hơn ngày hôm qua!

  2. Có 20 thành viên đã nói lời cảm ơn tới nbc cho bài viết này:

    *anhvu# (14/11/08),anhcutun (19/05/10),Hanoigio (30/10/10),hiepvf (21/04/10),jakervanilla (15/10/10),luonggiacat (15/08/08),maiyeu2307 (15/08/08),meomuadong (28/04/12),namda (17/08/08),namdan1 (23/06/09),ngdinhthinh (04/03/11),nguyendangsonx2 (04/01/13),phangxi (05/10/11),phongvan38 (21/02/11),quanghai1384 (10/05/09),satthumaulanh (15/08/08),thaiduy47 (12/10/09),the huan (06/04/11),timosi™ (25/06/09),tranvuqn (27/09/10)

  3. #2
    Administrator Avatar của nbc
    Tham gia ngày
    19/03/07
    Đến từ
    Đà Nẵng city
    Bài gửi
    8.402
    Cảm ơn
    3.378
    Được cảm ơn 17.536 lần trong 4.775 bài viết

    Mặc định

    Cấu trúc của bộ ASTM:

    Sec.01 IRON AND STEEL PRODUCTS

    Sec.02 NONFERROUS METAL PRODUCTS

    Sec.03 METALS TEST METHODS AND ANALYTICAL PROCEDURES

    Sec.04 CONSTRUCTIONS MATERIALS

    Sec.05 PETROLEUM PRODUCTS, LUBRICANTS, AND FOSSIL FUELS

    Sec.06 PAINTS, RELATED COATINGS AND AROMATICS

    Sec.07 TEXTILES

    Sec.08 PLASTICS

    Sec.09 RUBBER

    Sec.10 ELECTRICAL INSULATION AND ELECTRONICS

    Sec.11 WATER AND ENVIRONMENTAL TECHNOLOGY

    Sec.12 NUCLEAR, SOLAR, AND GEOTHERMAL ENERGY

    Sec.13 MEDICAL DEVICES

    Trong mỗi Sec lại có nhiều Volume nhỏ, danh mục các phép thử trong các Vol sẽ được cung cấp ở các bài viết sau.
    Ngày hôm nay tốt hơn ngày hôm qua!

  4. Có 9 thành viên đã nói lời cảm ơn tới nbc cho bài viết này:

    bluesea020285 (28/10/09),Hanoigio (30/10/10),luonggiacat (15/08/08),ngdinhthinh (04/03/11),nguyendangsonx2 (04/01/13),tieunguu (09/06/10),tranvuqn (27/09/10),tuancon0803 (30/06/10),vhhuynh (28/09/08)

  5. #3
    Administrator Avatar của nbc
    Tham gia ngày
    19/03/07
    Đến từ
    Đà Nẵng city
    Bài gửi
    8.402
    Cảm ơn
    3.378
    Được cảm ơn 17.536 lần trong 4.775 bài viết

    Mặc định

    Danh mục các tiêu chuẩn - phương pháp thử nghiệm trong Volume 1.1

    A53/A53M-99b Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A105/A105M-98 Standard Specification for Carbon Steel Forgings for Piping Applications
    A106-99e1 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

    A134-96 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

    A135-97c Standard Specification for Electric-Resistance-Welded Steel Pipe
    A139-00 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A178/A178M-95(2000) Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

    A179/A179M-90a(1996)e1 Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

    A181/A181M-00 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

    A182/A182M-00b Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    A192/A192M-91(1996)e1 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

    A193/A193M-00e1 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    A194/A194M-00 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both

    A209/A209M-98 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

    A210/A210M-96 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

    A213/A213M-99ae1 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

    A214/A214M-96 Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

    A234/A234M-00 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    A249/A249M-98e1 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

    A250/A250M-95 Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

    A252-98e1 Standard Specification for Welded and Seamless Steel Pipe Piles

    A254-97 Standard Specification for Copper-Brazed Steel Tubing

    A268/A268M-00e1 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    A269-00 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

    A270-98ae3 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing

    A312/A312M-00b Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes

    A320/A320M-00a Standard Specification for Alloy/Steel Bolting Materials for Low-Temperature Service

    A333/A333M-99 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service

    A334/A334M-99 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

    A335/A335M-00 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

    A350/A350M-00a Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

    A358/A358M-00 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service

    A369/A369M-00 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

    A370-97a Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A376/A376M-00 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service

    A381-96 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

    A403/A403M-00b Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

    A409/A409M-95ae1 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

    A420/A420M-00 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

    A423/A423M-95(2000) Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

    A426-92(1997) Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

    A437/A437M-00 Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service

    A450/A450M-96a Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

    A451-93(1997) Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

    A453/A453M-00 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels

    A498-98 Standard Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins

    A500-99 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A501-99 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

    A511-96 Standard Specification for Seamless Stainless Steel Mechanical Tubing

    A512-96 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

    A513-00 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

    A519-96 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

    A522/A522M-95b Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service

    A523-96 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

    A524-96 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

    A530/A530M-99e1 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

    A539-99 Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines

    A540/A540M-00 Standard Specification for Alloy-Steel Bolting Materials for Special Applications

    A554-98e1 Standard Specification for Welded Stainless Steel Mechanical Tubing

    A556/A556M-96 Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

    A587-96 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

    A589-96 Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe

    A595-98 Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use

    A608-91a(1998) Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

    A618-99 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

    A632-98 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

    A660-96 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

    A671-96 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

    A672-96 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

    A688/A688M-00 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes

    A691-98 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

    A694/A694M-00 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

    A707/A707M-00a Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

    A714-99 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe

    A727/A727M-00 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

    A733-99 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

    A751-96 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A758/A758M-98 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

    A771/A771M-95 Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components

    A774/A774M-98 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

    A778-00 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

    A787-00 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing

    A789/A789M-00a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

    A790/A790M-00e1 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

    A795-00 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

    A803/A803M-98 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes

    A813/A813M-95e2 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

    A814/A814M-96(1998) Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

    A815/A815M-00 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

    A822-90(2000) Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service

    A826/A826M-95 Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components

    A836/A836M-95b Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service

    A847-99a Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

    A851-96 Standard Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes

    A858/A858M-00 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

    A860/A860M-96 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings

    A865-97 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

    A872-91(1997) Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

    A908-91(1998) Standard Specification for Stainless Steel Needle Tubing

    A928/A928M-00 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

    A941-00a Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

    A943/A943M-95e1 Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

    A949/A949M-00 Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

    A953-96 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing

    A954-96 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe

    A959-00a Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

    A960-00 Standard Specification for Common Requirements for Wrought Steel Piping Fittings

    A961-00b Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

    A962/A962M-00 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range

    A972/A972M-00 Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

    A984/A984M-00 Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded

    A988-98 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

    A989-98 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

    A994-98 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

    A999/A999M-98 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

    A1005/A1005M-00e1 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded

    A1006/A1006M-00 Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

    A1012-00 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

    E527-83(1997)e1 Standard Practice for Numbering Metals and Alloys (UNS)
    Ngày hôm nay tốt hơn ngày hôm qua!

  6. Có 11 thành viên đã nói lời cảm ơn tới nbc cho bài viết này:

    faxtel22 (12/11/10),Hanoigio (30/10/10),KEM (15/08/08),luonggiacat (15/08/08),ngdinhthinh (04/03/11),quanghieux3 (28/08/09),thanhsuoi (24/10/08),tieunguu (09/06/10),tranvuqn (27/09/10),vhhuynh (28/09/08),xuantruong1510 (24/10/11)

  7. #4
    Administrator Avatar của nbc
    Tham gia ngày
    19/03/07
    Đến từ
    Đà Nẵng city
    Bài gửi
    8.402
    Cảm ơn
    3.378
    Được cảm ơn 17.536 lần trong 4.775 bài viết

    Mặc định

    Danh mục các tiêu chuẩn - phương pháp thử nghiệm trong Volume 1.2


    A27/A27M-95(2000) Standard Specification for Steel Castings, Carbon, for General Application

    A47/A47M-99 Standard Specification for Ferritic Malleable Iron Castings

    A48-94ae1 Standard Specification for Gray Iron Castings

    A74-98 Standard Specification for Cast Iron Soil Pipe and Fittings

    A99-82(2000) Standard Specification for Ferromanganese

    A100-93(2000) Standard Specification for Ferrosilicon

    A101-93(2000) Standard Specification for Ferrochromium

    A102-93(2000) Standard Specification for Ferrovanadium

    A126-95e1 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

    A128/A128M-93(1998) Standard Specification for Steel Castings, Austenitic Manganese

    A132-89(2000) Standard Specification for Ferromolybdenum

    A146-64(2000) Standard Specification for Molybdenum Oxide Products

    A148/A148M-93b(1998) Standard Specification for Steel Castings, High Strength, for Structural Purposes

    A159-83(1993) Standard Specification for Automotive Gray Iron Castings

    A197/A197M-00 Standard Specification for Cupola Malleable Iron

    A216/A216M-93(1998) Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service

    A217/A217M-99 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure- Containing Parts, Suitable for High-Temperature Service

    A220/A220M-99 Standard Specification for Pearlitic Malleable Iron

    A247-67(1998) Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings

    A278M-93e1 Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 350°C

    A278-93 Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F

    A297/A297M-97(1998) Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

    A319-71(1995) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts

    A323-93(2000) Standard Specification for Ferroboron

    A324-73(2000) Standard Specification for Ferrotitanium

    A327M-91(1997) Standard Test Methods for Impact Testing of Cast Irons (Metric)

    A327-91(1997) Standard Test Methods for Impact Testing of Cast Irons

    A338-84(1998) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)

    A351/A351M-00 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts

    A352/A352M-93(1998) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

    A356/A356M-98e1 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

    A367-60(1999) Standard Test Methods of Chill Testing of Cast Iron

    A370-97a Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A377-99 Standard Index of Specifications for Ductile-Iron Pressure Pipe

    A389/A389M-93(1998) Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service

    A395/A395M-99 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A436-84(1997)e1 Standard Specification for Austenitic Gray Iron Castings

    A438-80(1997) Standard Test Method for Transverse Testing of Gray Cast Iron

    A439-83(1999) Standard Specification for Austenitic Ductile Iron Castings

    A447/A447M-93(1998) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

    A476/A476M-00 Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

    A481-94(2000) Standard Specification for Chromium Metal

    A482-93(2000) Standard Specification for Ferrochrome-Silicon

    A483-64(2000) Standard Specification for Silicomanganese

    A487/A487M-93(1998) Standard Specification for Steel Castings Suitable for Pressure Service

    A488/A488M-99 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

    A494/A494M-00 Standard Specification for Castings, Nickel and Nickel Alloy

    A495-94(2000) Standard Specification for Calcium-Silicon Alloys

    A518/A518M-99 Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

    A532/A532M-93a(1999)e1 Standard Specification for Abrasion-Resistant Cast Irons

    A536-84(1999)e1 Standard Specification for Ductile Iron Castings

    A550-78(2000) Standard Specification for Ferrocolumbium

    A560/A560M-93(1998) Standard Specification for Castings, Chromium-Nickel Alloy

    A571M-84(1997) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service [Metric]

    A571-84(1997) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

    A583-93(1999) Standard Specification for Cast Steel Wheels for Railway Service

    A601-96(2000) Standard Specification for Electrolytic Manganese Metal

    A602-94(1998) Standard Specification for Automotive Malleable Iron Castings

    A609/A609M-91(1997) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

    A610-79(2000) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size

    A636-76(2000) Standard Specification for Nickel Oxide Sinter

    A644-98 Standard Terminology Relating to Iron Castings

    A667/A667M-87(1998) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders

    A674-00 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

    A701-96(2000) Standard Specification for Ferromanganese-Silicon

    A703/A703M-99 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A716-99 Standard Specification for Ductile Iron Culvert Pipe

    A732/A732M-98 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

    A743/A743M-98ae1 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

    A744/A744M-00 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

    A746-99 Standard Specification for Ductile Iron Gravity Sewer Pipe

    A747/A747M-99 Standard Specification for Steel Castings, Stainless, Precipitation Hardening

    A748/A748M-87(1998) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use

    A751-96 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A757/A757M-00 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

    A781/A781M-00 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A799/A799M-92(1997) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content

    A800/A800M-91(1997)e1 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof

    A802/A802M-95(1996) Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

    A823-99 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings

    A834-95 Standard Specification for Common Requirements for Iron Castings for General Industrial Use

    A835-84(2000) Standard Specification for Sizes of Ferroalloys and Alloy Additives

    A842-85(1997) Standard Specification for Compacted Graphite Iron Castings

    A845-85(2000) Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel

    A846-85(2000) Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel

    A861-94e1 Standard Specification for High-Silicon Iron Pipe and Fittings

    A874/A874M-98 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

    A888-98e1 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

    A890/A890M-99 Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

    A897M-90(1997) Standard Specification for Austempered Ductile Iron Castings [Metric]

    A897-90(1997) Standard Specification for Austempered Ductile Iron Castings

    A903/A903M-99 Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

    A915/A915M-93(1998) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades

    A922-93(2000) Standard Specification for Silicon Metal

    A942-95 Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells

    A957-96 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A958-00 Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

    A985-98a Standard Specification for Steel Investment Casting General Requirements, for Pressure-Containing Parts

    A990-00 Standard Specification for Chastings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosion Service

    A993-98 Standard Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature

    A995-98 Standard Specification for Casting, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

    A997-98 Standard Practice for Investment Castings, Surfce Acceptance Standards, Visual Examination

    A1001-99 Standard Specification for High Strength Steel Castings in Heavy Sections

    A1002-99 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
    Ngày hôm nay tốt hơn ngày hôm qua!

  8. Có 5 thành viên đã nói lời cảm ơn tới nbc cho bài viết này:

    Hanoigio (30/10/10),luonggiacat (15/08/08),ngdinhthinh (04/03/11),tranvuqn (27/09/10),vhhuynh (28/09/08)

  9. #5
    Administrator Avatar của nbc
    Tham gia ngày
    19/03/07
    Đến từ
    Đà Nẵng city
    Bài gửi
    8.402
    Cảm ơn
    3.378
    Được cảm ơn 17.536 lần trong 4.775 bài viết

    Mặc định

    Danh mục các tiêu chuẩn - phương pháp thử nghiệm trong Volume 1.3

    A109/A109M-00e1 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A167-99 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

    A176-99 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

    A227/A227M-99 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

    A228/A228M-00 Standard Specification for Steel Wire, Music Spring Quality

    A229/A229M-99 Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs

    A230/A230M-99 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

    A231/A231M-96 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

    A232/A232M-99 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

    A240/A240M-00 Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels

    A262-98 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A263-94a(1999) Standard Specification for Corrosion-Resisting Chromium Steel-Clad Plate, Sheet, and Strip

    A264-94a(1999) Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate, Sheet, and Strip

    A265-94a(1999) Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

    A276-00a Standard Specification for Stainless Steel Bars and Shapes

    A313/A313M-98 Standard Specification for Stainless Steel Spring Wire

    A314-97 Standard Specification for Stainless Steel Billets and Bars for Forging

    A368-95a(2000) Standard Specification for Stainless Steel Wire Strand

    A370-97a Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A380-99e1 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

    A401/A401M-98 Standard Specification for Steel Wire, Chromium-Silicon Alloy

    A407-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

    A414/A414M-00 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels

    A417-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units

    A424-00 Standard Specification for Steel, Sheet, for Porcelain Enameling

    A473-99 Standard Specification for Stainless Steel Forgings

    A478-97 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting
    Wire

    A479/A479M-00 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M-99b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A484/A484M-00 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

    A492-95(2000) Standard Specification for Stainless Steel Rope Wire

    A493-95(2000) Standard Specification for Stainless Steel Wire and Wire Rods for Cold
    Heading and Cold Forging

    A505-00 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A506-00 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A507-00 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A510M-00 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]

    A510-00 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel

    A555/A555M-97 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A564/A564M-99 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A568/A568M-00b Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A580/A580M-98 Standard Specification for Stainless Steel Wire

    A581/A581M-95b(2000) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods

    A582/A582M-95b Standard Specification for Free-Machining Stainless Steel Bars

    A606-98 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

    A635/A635M-00 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled

    A638/A638M-00 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

    A659/A659M-97 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

    A666-00 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

    A679/A679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

    A682/A682M-00 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For

    A684/A684M-86(1998) Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A693-93(1999) Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A705/A705M-95(2000) Standard Specification for Age-Hardening Stainless Steel Forgings

    A713-93(1998) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

    A749/A749M-97 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A751-96 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A752M-93(1998) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]

    A752-93(1998) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel

    A763-93(1999)e1 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

    A764-95 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A793-96 Standard Specification for Rolled Floor Plate, Stainless Steel

    A794-97 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled

    A805-93(1998) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

    A831/A831M-95(2000) Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components

    A853-93(1998) Standard Specification for Steel Wire, Carbon, for General Use

    A877/A877M-99 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality

    A878/A878M-99 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

    A880-95 Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys

    A887-89(2000) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

    A895-89(2000) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

    A899-91(1996) Standard Specification for Steel Wire, Epoxy-Coated

    A905-93(1998) Standard Specification for Steel Wire, Pressure Vessel Winding

    A907/A907M-96 Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, Structural Quality

    A923-98 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels

    A931-96 Standard Test Method for Tension Testing of Wire Ropes and Strand

    A935/A935M-97a Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled

    A936/A936M-97a Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Hot-Rolled, with Improved Formability

    A938-97 Standard Test Method for Torsion Testing of Wire

    A946-95(2000) Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service

    A947M-95(2000) Standard Specification for Textured Stainless Steel Sheet [Metric]

    A967-99e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

    A968-96 Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service

    A980-97 Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled

    A991/A991M-98 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

    A1000-99 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

    A1007-00 Standard Specification for Carbon Steel Wire for Wire Rope

    A1008/A1008M-00 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability

    A1010-00 Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip

    A1011/A1011M-00 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability

    F1267-91(1997) Standard Specification for Metal, Expanded, Steel
    Ngày hôm nay tốt hơn ngày hôm qua!

  10. Có 5 thành viên đã nói lời cảm ơn tới nbc cho bài viết này:

    Hanoigio (30/10/10),luonggiacat (15/08/08),ngdinhthinh (04/03/11),tieunguu (09/06/10),tranvuqn (27/09/10)

  11. #6
    Administrator Avatar của nbc
    Tham gia ngày
    19/03/07
    Đến từ
    Đà Nẵng city
    Bài gửi
    8.402
    Cảm ơn
    3.378
    Được cảm ơn 17.536 lần trong 4.775 bài viết

    Mặc định

    Danh mục các tiêu chuẩn - phương pháp thử nghiệm trong Volume 1.4

    A1-00 Standard Specification for Carbon Steel Tee Rails

    A2-90(1997) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

    A3-87(1995) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

    A6/A6M-00a Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A20/A20M-00a Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A36/A36M-00a Standard Specification for Carbon Structural Steel

    A49-95 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

    A65-87(1995) Standard Specification for Steel Track Spikes

    A66-87(1995) Standard Specification for Steel Screw Spikes

    A67-00 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked

    A82-97a Standard Specification for Steel Wire, Plain, for Concrete Reinforcement

    A131/A131M-94 Standard Specification for Structural Steel for Ships

    A183-98 Standard Specification for Carbon Steel Track Bolts and Nuts

    A184/A184M-96 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement

    A185-97 Standard Specification for Steel Welded Wire Fabric, Plain, for Concrete Reinforcement

    A202/A202M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon

    A203/A203M-97 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

    A204/A204M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

    A225/A225M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

    A242/A242M-00a Standard Specification for High-Strength Low-Alloy Structural Steel

    A283/A283M-00 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A285/A285M-90(1996)e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

    A299/A299M-97e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

    A302/A302M-97e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A328/A328M-00 Standard Specification for Steel Sheet Piling

    A353/A353M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered

    A370-97a Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A387/A387M-99 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

    A416/A416M-99 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

    A421/A421M-98a Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

    A435/A435M-90(1996) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

    A455/A455M-90(1996)e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

    A496-97a Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement

    A497-99 Standard Specification for Steel Welded Wire Fabric, Deformed, for Concrete Reinforcement

    A514/A514M-00a Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

    A515/A515M-92(1997) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

    A516/A516M-90(1996)e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

    A517/A517M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

    A529/A529M-00 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

    A533/A533M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A537/A537M-95(2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

    A542/A542M-99 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

    A543/A543M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

    A553/A553M-95(2000) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel

    A562/A562M-90(1996)e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

    A572/A572M-00 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

    A573/A573M-00a Standard Specification for Structural Carbon Steel Plates of Improved Toughness

    A577/A577M-90(1996) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

    A578/A578M-96 Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications

    A588/A588M-00 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4 in. [100 mm] Thick

    A612/A612M-00 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

    A615/A615M-00 Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement

    A633/A633M-00a Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

    A645/A645M-99a Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated

    A648-95(2000) Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe

    A656/A656M-00a Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

    A662/A662M-99 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A673/A673M-95 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A678/A678M-00a Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates

    A690/A690M-00a Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments

    A704/A704M-96 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

    A706/A706M-00 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    A709/A709M-00a Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges

    A710/A710M-00 Standard Specification for Age-Hardening Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

    A722/A722M-98 Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete

    A724/A724M-99 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels

    A734/A734M-87a(1997) Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered

    A735/A735M-99 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service

    A736/A736M-88(2000) Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel

    A737/A737M-99 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

    A738/A738M-00 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A751-96 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A759-85(1992) Standard Specification for Carbon Steel Crane Rails

    A767/A767M-00b Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

    A769/A769M-00 Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes

    A770/A770M-86(1996) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

    A775/A775M-00 Standard Specification for Epoxy-Coated Reinforcing Steel Bars

    A779/A779M-00 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete

    A782/A782M-90(1996)e1 Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel

    A786/A786M-00 Standard Specification for Rolled Steel Floor Plates

    A808/A808M-00a Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness

    A820-96 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A821/A821M-99 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks

    A827/A827M-93a(1998) Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

    A829/A829M-00 Standard Specification for Alloy Structural Steel Plates

    A830/A830M-00 Standard Specification for Plastes, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

    A832/A832M-99 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

    A841/A841M-98e1 Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

    A844/A844M-93(1999) Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

    A852/A852M-00a Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick

    A857/A857M-00a Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

    A871/A871M-00a Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

    A881/A881M-99 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties

    A882/A882M-96e1 Standard Specification for Epoxy-Coated Seven-Wire Prestressing Steel Strand

    A884/A884M-99 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement

    A886/A886M-99 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

    A898/A898M-91(1996) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

    A910/A910M-99 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete

    A911/A911M-99 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties

    A913/A913M-00a Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

    A933/A933M-95 Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement

    A934/A934M-00 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

    A944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

    A945/A945M-00 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

    A950/A950M-99 Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

    A951-00 Standard Specification for Masonry Joint Reinforcement

    A955M-96 Standard Specification for Deformed and Plain Stainless Steel Bars For Concrete Reinforcement [Metric]

    A970/A970M-98 Standard Specification for Welded or Forged Headed Bars for Concrete Reinforcement

    A981-97 Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors

    A992/A992M-98e1 Standard Specification for Steel for Structural Shapes For Use in Building Framing

    A996/A996M-00 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
    Ngày hôm nay tốt hơn ngày hôm qua!

  12. Có 3 thành viên đã nói lời cảm ơn tới nbc cho bài viết này:

    Hanoigio (30/10/10),luonggiacat (15/08/08),ngdinhthinh (04/03/11)

  13. #7
    Administrator Avatar của nbc
    Tham gia ngày
    19/03/07
    Đến từ
    Đà Nẵng city
    Bài gửi
    8.402
    Cảm ơn
    3.378
    Được cảm ơn 17.536 lần trong 4.775 bài viết

    Mặc định

    Danh mục các tiêu chuẩn - phương pháp thử nghiệm trong Volume 1.5

    A21-94(1999) Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use
    A29/A29M-99e1 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for
    A108-99 Standard Specification for Steel Bars, Carbon, Cold-Finished, Standard Quality
    A125-96 Standard Specification for Steel Springs, Helical, Heat-Treated
    A255-99 Standard Test Method for Determining Hardenability of Steel
    A266/A266M-99 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
    A275/A275M-98 Standard Test Method for Magnetic Particle Examination of Steel Forgings
    A288-91(1998) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
    A289/A289M-97 Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
    A290-95(1999) Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
    A291-95(1999) Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
    A295-98 Standard Specification for High-Carbon Anti-Friction Bearing Steel
    A304-96 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
    A311/A311M-95(2000) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
    A321-90(1995)e1 Standard Specification for Steel Bars, Carbon, Quenched and Tempered
    A322-91(1996) Standard Specification for Steel Bars, Alloy, Standard Grades
    A331-95(2000) Standard Specification for Steel Bars, Alloy, Cold-Finished
    A336/A336M-99e1 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
    A355-89(2000) Standard Specification for Steel Bars, Alloys, for Nitriding
    A370-97a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
    A372/A372M-99 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
    A388/A388M-95(2000) Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
    A391/A391M-98 Standard Specification for Grade 80 Alloy Steel Chain
    A400-69(2000) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
    A413/A413M-00 Standard Specification for Carbon Steel Chain
    A418-99 Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
    A427-74(1996)e1 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
    A434-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
    A456/A456M-99 Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
    A466/A466M-98 Standard Specification for Weldless Chain
    A467/A467M-98 Standard Specification for Machine and Coil Chain
    A469-94a(1999) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
    A470-99 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings For Turbine Rotors and Shafts
    A471-94(1999) Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
    A472-98 Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings
    A485-00 Standard Specification for High Hardenability Antifriction Bearing Steel
    A499-89(1997)e1 Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
    A503/A503M-99 Standard Specification for Ultrasonic Examination of Large Forged Crankshafts
    A504-93(1999) Standard Specification for Wrought Carbon Steel Wheels
    A508/A508M-95(1999) Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
    A521-96 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
    A531/A531M-91(1996) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
    A534-94 Standard Specification for Carburizing Steels for Anti-Friction Bearings
    A541/A541M-95(1999) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
    A551-94(1999) Standard Specification for Steel Tires
    A561-71(1999) Standard Recommended Practice for Macrotech Testing of Tool Steel Bars
    A565-97 Standard Specification for Martensitic Stainless Steel Bars, Forgings, and Forging Stock for High-Temperature Service
    A575-96 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
    A576-90b(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
    A579-99 Standard Specification for Superstrength Alloy Steel Forgings
    A592/A592M-89(1999) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
    A597-87(1999) Standard Specification for Cast Tool Steel
    A600-92a(1999) Standard Specification for Tool Steel High Speed
    A604-93(1998) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
    A646-95(1999) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
    A649/A649M-99 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
    A663/A663M-89(2000) Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
    A668/A668M-96e1 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
    A675/A675M-90a(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
    A681-94(1999) Standard Specification for Tool Steels Alloy
    A686-92(1999) Standard Specification for Tool Steel, Carbon
    A689-97 Standard Specification for Carbon and Alloy Steel Bars for Springs
    A695-90b(1995)e1 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications
    A696-90a(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
    A700-99e1 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
    A702-89(2000) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
    A711-92(1996)e1 Standard Specification for Steel Forging Stock
    A723/A723M-94(1999) Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
    A729-93(1999) Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
    A730-93(1999) Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use
    A739-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
    A745/A745M-94(1999) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
    A751-96 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
    A756-94 Standard Specification for Stainless Anti-Friction Bearing Steel
    A765/A765M-98a Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
    A768-95 Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
    A788-98a Standard Specification for Steel Forgings, General Requirements
    A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
    A837-91(1996)e1 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
    A859/A859M-95(1999) Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
    A866-94 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
    A891-98 Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
    A892-88(1995)e1 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
    A906/A906M-99 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
    A909-94(1999) Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
    A914/A914M-92(1999) Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
    A920/A920M-97 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
    A921/A921M-93(1999) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
    A939-96 Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
    A940-96 Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
    A952/A952M-98 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
    A956-00 Standard Test Method for Leeb Hardness Testing of Steel Products
    A965/A965M-00 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
    A966/A966M-96 Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
    A973/A973M-00 Standard Specification for Grade 100 Alloy Steel Chain
    A982-00 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
    A983/A983M-98 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
    A986/A986M-98 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
    E588-95 Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
    E618-81(1996) Standard Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine
    Ngày hôm nay tốt hơn ngày hôm qua!

  14. Có 4 thành viên đã nói lời cảm ơn tới nbc cho bài viết này:

    Hanoigio (30/10/10),luonggiacat (15/08/08),ngdinhthinh (04/03/11),vhhuynh (28/09/08)

  15. #8
    Administrator Avatar của nbc
    Tham gia ngày
    19/03/07
    Đến từ
    Đà Nẵng city
    Bài gửi
    8.402
    Cảm ơn
    3.378
    Được cảm ơn 17.536 lần trong 4.775 bài viết

    Mặc định

    Danh mục các tiêu chuẩn - phương pháp thử nghiệm trong Volume 1.6

    A90/A90M-95a(1999) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
    A111-99a Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
    A116-00 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
    A121-99 Standard Specification for Zinc-Coated (Galvanized) Steel Barbed Wire
    A123/A123M-00 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
    A143-74(1999) Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
    A153/A153M-00 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
    A239-95(1999) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
    A308-99 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
    A309-94a(1999) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
    A363-98 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
    A384-76(1996) Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
    A385-00 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
    A390-95 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
    A392-96 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
    A411-98 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
    A428/A428M-95 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
    A459-97 Standard Specification for Zinc-Coated Flat Steel Armoring Tape
    A460-94(1999) Standard Specification for Copper-Clad Steel Wire Strand
    A463/A463M-00 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
    A474-98 Standard Specification for Aluminum-Coated Steel Wire Strand
    A475-98 Standard Specification for Zinc-Coated Steel Wire Strand
    A491-96 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
    A584-97 Standard Specification for Aluminum-Coated Steel Woven Wire Fence Fabric
    A585-97 Standard Specification for Aluminum-Coated Steel Barbed Wire
    A586-98 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand
    A591/A591M-98 Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications
    A599/A599M-99 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
    A603-98 Standard Specification for Zinc-Coated Steel Structural Wire Rope
    A623M-00 Standard Specification for Tin Mill Products, General Requirements [Metric]
    A623-00 Standard Specification for Tin Mill Products, General Requirements
    A624/A624M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
    A625/A625M-98 Standard Specification for Tin Mill Products, Black Plate, Single Reduced
    A626/A626M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
    A630-98 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
    A640-97 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
    A641/A641M-98 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
    A650/A650M-98 Standard Specification for Tin Mill Products, Black Plate, Double Reduced
    A653/A653M-00 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
    A657/A657M-98a Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
    A740-98 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
    A741-98 Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
    A742/A742M-98 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
    A754/A754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
    A755/A755M-99 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
    A760/A760M-00 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
    A761/A761M-98 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
    A762/A762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
    A780-00 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
    A792/A792M-99 Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
    A796/A796M-00 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
    A798/A798M-97a Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
    A807/A807M-97 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
    A809-98 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
    A810-00 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
    A817-00 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
    A818-91(1996)e1 Standard Specification for Coppered Carbon Steel Wire
    A824-95 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
    A849-00 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
    A854/A854M-98 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
    A855/A855M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
    A856/A856M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
    A862/A862M-98 Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
    A875/A875M-99 Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
    A879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
    A885/A885M-96 Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe
    A896-89(1999) Standard Practice for Conducting Case Studies on Galvanized Structures
    A902-99 Standard Terminology Relating to Metallic Coated Steel Products
    A917-00 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
    A918-00 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
    A924/A924M-99 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
    A925-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
    A926-97 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
    A929/A929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
    A930-99 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
    A964/A964M-96 Standard Specification for Corrugated Steel Box Culverts
    A974-97 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
    A975-97 Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
    A978/A978M-97 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
    A979/A979M-97 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
    A987-00 Standard Test Method for Measuring Shape Characteristics of Tin Mill Products
    A998/A998M-98 Standard Practice for Structural Design of Reinforcements for Fittings in Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
    A1003/A1003M-00 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
    A1004/A1004M-99 Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
    F537-93 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
    F552-94 Standard Terminology Relating to Chain Link Fencing
    F567-00 Standard Practice for Installation of Chain-Link Fence
    F626-96a Standard Specification for Fence Fittings
    F654-98 Standard Specification for Residential Chain Link Fence Gates
    F668-99a Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
    F761-97 Standard Specification for Strength Requirements of Steel Posts and Rails for Residential Chain-Link Fence
    F900-94(2000) Standard Specification for Industrial and Commercial Swing Gates
    F934-96 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
    F964-94 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing
    F969-96 Standard Practice for Construction of Chain-Link Tennis Court Fence
    F1043-00 Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework
    F1083-97 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
    F1183-96 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
    F1184-94(2000) Standard Specification for Industrial and Commercial Horizontal Slide Gates
    F1345-96 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
    F1379-95 Standard Terminology Relating to Barbed Tape
    F1553-96 Standard Guide for Specifying Chain Link Fence
    F1664-95 Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence
    F1665-95 Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Barbed Wire Used With Chain-Link Fence
    F1712-96a Standard Specification for Steel Chain-Link Fencing Materials Used in Detention and Correctional Facilities
    F1908-98 Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
    F1910-98e1 Standard Specification for Long Barbed Tape Obstacles
    F1911-98 Standard Practice for Installation of Barbed Tape
    F1999-00 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
    F2000-00a Standard Guide for Fences for Ballfields and Other Sports Facilities
    F2049-00 Standard Guide for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas

    Ngày hôm nay tốt hơn ngày hôm qua!

  16. Có 4 thành viên đã nói lời cảm ơn tới nbc cho bài viết này:

    cmckhoi (25/10/10),Hanoigio (30/10/10),luonggiacat (15/08/08),ngdinhthinh (04/03/11)

  17. #9
    Administrator Avatar của nbc
    Tham gia ngày
    19/03/07
    Đến từ
    Đà Nẵng city
    Bài gửi
    8.402
    Cảm ơn
    3.378
    Được cảm ơn 17.536 lần trong 4.775 bài viết

    Mặc định

    Danh mục các tiêu chuẩn - phương pháp thử nghiệm trong Volume 1.7

    F670-87(1994)e1 Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing

    F681-82(1998) Standard Practice for Use of Branch Connections

    F682-82a(1998) Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

    F683-99 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery

    F704-81(1996)e1 Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints

    F707/F707M-94 Standard Specification for Modular Gage Boards

    F708-92(1997) Standard Practice for Design and Installation of Rigid Pipe Hangers

    F718-99 Standard for Shipbuilders and Marine Paints and Coatings Product/ Procedure Data Sheet

    F721-81(1998) Standard Specification for Gage Piping Assemblies

    F722-82(1998) Standard Specification for Welded Joints for Shipboard Piping Systems

    F765-93(1998) Standard Specification for Wildcats, Ship Anchor Chain

    F782-95 Standard Specification for Doors, Furniture, Marine

    F783-88(1998) Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung

    F821-95 Standard Specification for Doors and Frames, Steel, Interior, Marine

    F822-93(1999) Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine

    F823-93(1999) Standard Specification for Desk, Log, Marine, Steel, with Cabinet

    F824-93(1999) Standard Specification for Tables, Mess, Marine, Steel

    F825-93(1999) Standard Specification for Drawers, Furniture, Marine, Steel

    F826-94(1999) Standard Specification for Tops, Furniture, Marine, Steel

    F840-83(1998)e1 Standard Specification for Ladders, Fixed, Vertical, Steel, Ship's

    F841-84(1998) Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels

    F856-97 Standard Practice for Mechanical Symbols, Shipboard Heating, Ventilation, and Air Conditioning (HVAC)

    F885-84(1996)e1 Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2

    F906-85(1998) Standard Specification for Letters and Numerals for Ships

    F916-85(1993)e1 Standard Specification for Elevators, Shipboard, Electromechanical Passenger, and Stores

    F940-99 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

    F941-99 Standard Practice for Inspection of Marine Surface Preparation and Coating Application

    F956-91(1996) Standard Specification for Bell, Cast, Sound Signalling

    F957-91(1996) Standard Specification for Gong, Sound Signaling

    F985-00 Standard Specification for Panama Canal Pilot Platform

    F986-86(1997) Standard Specification for Suction Strainer Boxes

    F987-93 Standard Specification for Portable Intermediate Flush Deck Stanchion

    F991M-95 Standard Specification for Docking/Drain Plug and Boss Assemblies [Metric]

    F992-86(1996)e1 Standard Specification for Valve Label Plates

    F993-86(1996)e1 Standard Specification for Valve Locking Devices

    F994-86(1996)e1 Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

    F998-00 Standard Specification for Centrifugal Pump, Shipboard Use

    F1000-95 Standard Practice for Piping System Drawing Symbols

    F1003-86(1992) Standard Specification for Searchlights on Motor Lifeboats

    F1005-91(1996) Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration

    F1006-86(1997) Standard Specification for Entrainment Separators for Use in Marine Piping Applications

    F1007-86(1996)e1 Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application

    F1014-92 Standard Specification for Flashlights on Vessels

    F1018-87a(1999)e1 Standard Specification for Steel Emergency Gear Stowage Locker

    F1019M-95a Standard Specification for Steel Deck Gear Stowage Box [Metric]

    F1020-86(1996)e1 Standard Specification for Line-Blind Valves for Marine Applications

    F1030-86(1998) Standard Practice for Selection of Valve Operators

    F1053/F1053M-94 Standard Guide for Steel Hull Construction Tolerances [Metric]

    F1068-90(1998)e1 Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

    F1069-87(1999) Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

    F1070-87(1999) Standard Specification for Doors, Non-Tight, for Marine Use

    F1071-94(1999) Standard Specification for Expanded-Metal Bulkhead Panels

    F1072-94(1999) Standard Specification for Expanded-Metal Doors

    F1073-87(1999) Standard Specification for Door Fittings, for Watertight/Gastight/Airtight, Weathertight, and Non-Tight Doors, for Marine Use

    F1074-87(1994)e1 Standard Specification for Cleats, Welded Horn Type

    F1075-97 Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained

    F1076-87(1997) Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube

    F1085-88(1994)e1 Standard Specification for Mattress and Box Springs, Berths

    F1092-87(1994)e1 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm- and Guard-Square Handrails

    F1097-91(1996) Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)

    F1098-87(1998) Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24

    F1099M-98 Standard Specification for Rat Guards, Ship's (Metric)

    F1106-87(1998) Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

    F1120-87(1998) Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

    F1121-87(1998) Standard Specification for International Shore Connections for Marine Fire Applications

    F1122-87(1998) Standard Specification for Quick Disconnect Couplings

    F1123-87(1998) Standard Specification for Non-Metallic Expansion Joints

    F1130-99 Standard Practice for Inspecting the Coating System of a Ship

    F1134-94 Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators

    F1138-98 Standard Specification for Spray Shields for Mechanical Joints

    F1139-88(1998) Standard Specification for Steam Traps and Drains

    F1142-98 Standard Specification for Manhole Cover Assembly Bolted, Semi-Flush, Oiltight and Watertight

    F1143-98 Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

    F1144-98 Standard Specification for Manhole Cover Assembly, Bolted, Hinged, Semi-Flush, Oiltight and Watertight, Hinged

    F1145-92(1996) Standard Specification for Turnbuckles, Swaged, Welded, Forged

    F1155-98 Standard Practice for Selection and Application of Piping System Materials

    F1166-95a(2000) Standard Practice for Human Engineering Design for Marine Systems, Equipment and Facilities

    F1172-88(1998) Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type

    F1173-95 Standard Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications

    F1178-88(1994)e1 Standard Specification for Enameling System, Baking, Metal Joiner Work and Furniture

    F1179-88(1997) Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs

    F1182-90(1996) Standard Specification for Anodes, Sacrificial Zinc Alloy

    F1196-94(2000) Standard Specification for Sliding Watertight Door Assemblies

    F1197-89(2000) Standard Specification for Sliding Watertight Door Control Systems

    F1198-92(1997) Standard Guide for Shipboard Fire Detection Systems

    F1199-88(1998) Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)

    F1200-88(1998) Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)

    F1201-88(1998) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F

    F1207M-96 Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]

    F1244-89(1999) Standard Specification for Berths, Marine

    F1245-89(1994)e1 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

    F1270-97 Standard Practice for Preparing and Locating Emergency Muster Lists

    F1271-90(1995)e1 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications

    F1273-91(1996)e1 Standard Specification for Tank Vent Flame Arresters

    F1297-90(1999) Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment

    F1298-90(1995)e1 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications

    F1309-98 Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

    F1311-90(1995)e1 Standard Specification for Large-Diameter Fabricated Carbon Steel Flanges

    F1312-90(1997) Standard Specification for Brick, Insulating, High Temperature Fire Clay

    F1321-92 Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel

    F1322-90(1998) Standard Guide for Selection of Shipboard Incinerators

    F1323-98 Standard Specification for Shipboard Incinerators

    F1330-91(1996)e1 Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe

    F1331-91(1996)e1 Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces

    F1332-99 Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F-25 Supplement to IEEE/ASTM SI 10)

    F1333-91(1996)e1 Standard Specification for Construction of Fire and Foam Station Cabinets

    F1337-91(1996) Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities

    F1338-91(1996) Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly

    F1347-91(1996) Standard Specification for Manually Operated Fueling Hose Reels

    F1348/F1348M-91(1997) Standard Specification for Pneumatic Rotary Descaling Machines

    F1369-93a Standard Specification for Heaters, Convection, Steam and Hot Water

    F1370-92 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard

    F1384-93 Standard Practice for Fire Tests of Marine Joiner Doors Assembly

    F1385-92 Standard Practice for Platforms in Cargo Tanks

    F1386-92(1997) Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding

    F1387-99 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings

    F1431-92(1998) Standard Specification for Water Trap for Diesel Exhaust

    F1433-97 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner

    F1437-92 Standard Practice for Inclined Cargo Tank Ladders

    F1455-92 Standard Guide for Selection of Structural Details for Ship Construction

    F1476-95a Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

    F1507-99 Standard Specification for Surge Suppressors for Shipboard Use

    F1508-96 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services

    F1510-98 Standard Specification for Rotary Positive Displacement Pumps, Commercial Ships Use

    F1511-98 Standard Specification for Mechanical Seals for Shipboard Pump Applications

    F1546/F1546M-96 Standard Specification for Fire Hose Nozzles

    F1547-99 Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding

    F1548-94 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

    F1565-00 Standard Specification for Pressure-Reducing Valves for Steam Service

    F1567-94 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers

    F1626-95(2000) Standard Practice for Preparing Shipboard Fire Control Plans

    F1669M-96 Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]

    F1685-00 Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems

    F1716-96 Standard Guide for Transition and Performance of Marine Software Systems Maintenance

    F1718-99 Standard Specification for Rotary Positive Displacement Fuel Pumps

    F1754-97 Standard Guide for Marine Vessel Structural Inspection Considerations

    F1755M-96 Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)

    F1756-97a Standard Guide for Implementation of a Fleet Management System Network

    F1757-96 Standard Guide for Digital Communication Protocols for Computerized Systems

    F1791-00 Standard Specification for Filters Used in Air or Nitrogen Systems

    F1792-97 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

    F1793-97 Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service

    F1794-97 Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems

    F1795-00 Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems

    F1799-97 Standard Guide for Shipboard Generated Waste Management Audits

    F1808-97a Standard Guide for Weight Control Technical Requirements for Surface Ships

    F1835-97 Standard Guide for Cable Splicing Installations

    F1836M-97 Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)

    F1837M-97 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

    F1878-98 Standard Guide for Escort Vessel Evaluation and Selection

    F1883-98 Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units

    F1985-99 Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves

    F1994-99 Standard Test Method for Shipboard Fixed Foam Firefighting Systems

    F2001-00a Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record

    F2014-00 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications

    F2015-00 Standard Specification for Lap Joint Flange Pipe End Applications

    F2016-00 Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings

    F2017-00 Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration

    F2039-00 Standard Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program

    F2044-00 Standard Specification for Liquid Level Indicating Equipment, Electrical

    F2045-00 Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic

    F2046-00 Standard Specification for Tachometers, Various


    Ngày hôm nay tốt hơn ngày hôm qua!

  18. Có 4 thành viên đã nói lời cảm ơn tới nbc cho bài viết này:

    Hanoigio (30/10/10),luonggiacat (15/08/08),ngdinhthinh (04/03/11),tieunguu (09/06/10)

  19. #10
    Administrator Avatar của nbc
    Tham gia ngày
    19/03/07
    Đến từ
    Đà Nẵng city
    Bài gửi
    8.402
    Cảm ơn
    3.378
    Được cảm ơn 17.536 lần trong 4.775 bài viết

    Mặc định

    Danh mục các tiêu chuẩn - phương pháp thử nghiệm trong Volume 1.8

    A31-00 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
    A307-00 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
    A325M-00 Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]
    A325-00 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
    A354-00a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
    A394-00 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
    A449-00 Standard Specification for Quenched and Tempered Steel Bolts and Studs
    A489-00 Standard Specification for Carbon Steel Lifting Eyes
    A490M-00 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
    A490-00 Standard Specification for Heat-Treated Steel Structural Bolts, 150 ksi Minimum Tensile Strength
    A563M-00 Standard Specification for Carbon and Alloy Steel Nuts [Metric]
    A563-00 Standard Specification for Carbon and Alloy Steel Nuts
    A574M-00 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
    A574-00 Standard Specification for Alloy Steel Socket-Head Cap Screws
    F432-95 Standard Specification for Roof and Rock Bolts and Accessories
    F436M-93(2000) Standard Specification for Hardened Steel Washers [Metric]
    F436-93(2000) Standard Specification for Hardened Steel Washers
    F467M-98 Standard Specification for Nonferrous Nuts for General Use [Metric]
    F467-98 Standard Specification for Nonferrous Nuts for General Use
    F468M-98 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]
    F468-98 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
    F541-00 Standard Specification for Alloy Steel Eyebolts
    F547-77(1995) Standard Terminology of Nails for Use with Wood and Wood-Base Materials
    F568M-98 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
    F592-84(1995) Standard Terminology of Collated and Cohered Fasteners and Their Application Tools
    F593-98 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
    F594-98 Standard Specification for Stainless Steel Nuts
    F606M-98 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]
    F606-98 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets
    F680-80(1993) Standard Test Methods for Nails
    F738M-97a Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
    F788/F788M-97 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
    F812/F812M-97 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
    F835M-00 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
    F835-00 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
    F836M-98 Standard Specification for Style 1 Stainless Steel Metric Nuts
    F837M-98 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
    F837-98 Standard Specification for Stainless Steel Socket Head Cap Screws
    F844-00 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
    F871M-98 Standard Specification for Electrodeposited Coatings on Threaded Components [Metric]
    F879M-98 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
    F879-98 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
    F880M-98 Standard Specification for Stainless Steel Socket Set Screws [Metric]
    F880-98 Standard Specification for Stainless Steel Socket-Set Screws
    F901-97 Standard Specification for Aluminum Transmission Tower Bolts and Nuts
    F912M-00 Standard Specification for Alloy Steel Socket Set Screws [Metric]
    F912-00 Standard Specification for Alloy Steel Socket Set Screws
    F959M-99a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]
    F959-99a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
    F1077-95a Standard Guide for Selection of Committee F-16 Fastener Specifications
    F1135-99 Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
    F1136-88(1998)e1 Standard Specification for Chromium/Zinc Corrosion Protective Coatings for Fasteners
    F1137-00 Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners
    F1428-92(1999) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
    F1469-99 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
    F1470-00 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
    F1503-95 Standard Practice for Machine/Process Potential Study Procedure
    F1554-99 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
    F1575-95 Standard Test Method for Determining Bending Yield Moment of Nails
    F1667-00 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    F1789-00a Standard Terminology of F-16 Mechanical Fasteners
    F1852-00 Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensil Strength
    F1940-99 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
    F1941M-00 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]
    F1941-00 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))
    Ngày hôm nay tốt hơn ngày hôm qua!

  20. Có 5 thành viên đã nói lời cảm ơn tới nbc cho bài viết này:

    chu minh thuan (12/04/12),Hanoigio (30/10/10),hhiencivileng (16/08/11),luonggiacat (15/08/08),ngdinhthinh (04/03/11)

Trang 1/6 123 ... CuốiCuối

Chủ đề tương tự

  1. Cần một số tiêu chuẩn ASTM hoặc AASHTO TCN,BS,JIS…
    Gửi bởi tienctc trong mục TCVN, TCXD, TCXDVN...
    Trả lời: 1
    Bài cuối: 16/11/12, 12:56 AM
  2. Tiêu chuẩn ASTM D7698
    Gửi bởi cvido trong mục Hệ thống văn bản, tiêu chuẩn
    Trả lời: 1
    Bài cuối: 03/04/12, 12:01 PM
  3. tiêu chuẩn ASTM C-39
    Gửi bởi LUUTHONG trong mục TCVN, TCXD, TCXDVN...
    Trả lời: 3
    Bài cuối: 31/08/11, 06:43 PM
  4. Tiêu chuẩn ASTM
    Gửi bởi tuancon0803 trong mục Hệ thống văn bản, tiêu chuẩn
    Trả lời: 14
    Bài cuối: 26/11/10, 04:20 PM
  5. Hỏi về tiêu chuẩn ASTM
    Gửi bởi saobang808 trong mục Thiết kế cầu thép
    Trả lời: 0
    Bài cuối: 12/04/09, 03:04 PM

Quyền viết bài

  • Bạn không thể gửi chủ đề mới
  • Bạn không thể gửi trả lời
  • Bạn không thể gửi file đính kèm
  • Bạn không thể sửa bài viết của mình
  •